Package: libedit2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 184
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libedit
Version: 3.1-20140620-2
Depends: libbsd0 (>= 0.0), libc6 (>= 2.17), libtinfo5
Pre-Depends: multiarch-support
Description: BSD editline and history libraries
 Command line editor library provides generic line editing,
 history, and tokenization functions.
 .
 It slightly resembles GNU readline.
Homepage: http://www.thrysoee.dk/editline/

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1447
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.1+deb8u1
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://pam.sourceforge.net/

Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: ncurses
Version: 5.9+20140913-1
Depends: libtinfo5 (= 5.9+20140913-1), libc6 (>= 2.15)
Pre-Depends: multiarch-support, libtinfo5 (>= 5.9-3)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: http://invisible-island.net/ncurses/

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: armhf
Multi-Arch: same
Source: audit
Version: 1:2.4-1
Depends: libaudit-common (>= 1:2.4-1), libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: http://people.redhat.com/sgrubb/audit/

Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 109
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: readline6
Version: 6.3-8
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: makedev
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 126
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.3.1-93
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.
 .
 This package is not necessary for most modern Linux systems, where the udev
 subsystem provides a more dynamic mechanism for device file management.

Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 386
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: ncurses
Version: 5.9+20140913-1
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/

Package: libgdbm3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 48
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: gdbm
Version: 1.8.3-13.1
Depends: libc6 (>= 2.4), dpkg (>= 1.15.4) | install-info
Pre-Depends: multiarch-support
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Homepage: http://directory.fsf.org/project/gdbm/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 4318
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: armhf
Source: perl
Version: 5.20.2-3+deb8u4
Replaces: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl5-base, perlapi-5.20.0, perlapi-5.20.1, perlapi-5.20.2
Pre-Depends: libc6 (>= 2.11), dpkg (>= 1.17.17)
Suggests: perl
Breaks: autoconf2.13 (<< 2.13-45), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libfile-path-perl (<< 2.09), libfile-spec-perl (<< 3.4801), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.29), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libscalar-list-utils-perl (<< 1:1.38), libsocket-perl (<< 2.013), libxsloader-perl (<< 0.17), pdl (<< 1:2.007-4), perl (<< 5.20.0~)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/

Package: libudev1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 90
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: systemd
Version: 215-17+deb8u4
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: libudev shared library
 This library provides access to udev device information.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: mountall
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 174
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.54
Replaces: upstart (<< 0.6.3-2)
Depends: makedev, udev, plymouth, coreutils (>= 7.1), libc6 (>= 2.9), libdbus-1-3 (>= 1.2.16), libnih-dbus1 (>= 1.0.0), libnih1 (>= 1.0.0), libudev1 (>= 183)
Pre-Depends: dpkg (>= 1.15.7.2)
Breaks: initscripts (<< 2.88dsf-24), policycoreutils (<< 2.0.69-2ubuntu4), usplash (<< 0.5.47)
Conffiles:
 /etc/dbus-1/system.d/Mountall.Server.conf 91b1414af1257d2ef089f84a3e5c1ed1
 /etc/init/mountall.conf ac0fbaa98e705e52f59ca9e4d39751ad
 /etc/init/mountall-net.conf feff70cd7006f6763e24263d381940f3
 /etc/init/mountall-reboot.conf 43e3c229085a13005b0681a49b2bef51
 /etc/init/mountall-shell.conf aa05af89db3de044d1cd7f6971b46d9f
 /etc/init/mounted-debugfs.conf 462c8aab0d9d4e6e496b1e2be5910edc
 /etc/init/mounted-dev.conf cf7bea42235e77168c996d774f059c44
 /etc/init/mounted-run.conf a26db58c801e0f6ec8738a5838aa53ed
 /etc/init/mounted-proc.conf de2147720fa25f20d06b1e1c89e3b247
 /etc/init/mounted-tmp.conf 289fa57d726885147a41b2b1f3695a29
 /etc/init/mounted-var.conf 02f90856c91a46e9cbed1c35b92fec6c
 /etc/init/mountall.sh.conf ee258840aad52477434cc22e34efcc50
 /etc/init/mountall-bootclean.sh.conf d1899239aa60ea903f43a3ac58c5c238
 /etc/init/mountkernfs.sh.conf 2e7449097b6cf88cba915edc1c339ec4
 /etc/init/mountdevsubfs.sh.conf dd33cb414bca17d97140d7f8671207f2
 /etc/init/bootmisc.sh.conf d1a51c54dcfe6f3f5265246888ba4161
 /etc/init/checkfs.sh.conf 2e928476ccb2ecefe9ee87e2f83d34da
 /etc/init/checkroot-bootclean.sh.conf e02a473c76e4a2bfc1efb4c367495052
 /etc/init/checkroot.sh.conf 3ea7f6ba450f431fd239e2b53a805216
 /etc/init/mountnfs.sh.conf 760a5b57cbd0d1e2c65ba6db9297a586
 /etc/init/mountnfs-bootclean.sh.conf 0b6f3f9e9f8757efee57f6a4839d7dff
 /etc/init/mtab.sh.conf 27aece82dbe70232d734d1dadfe87518
Description: filesystem mounting tool
 mountall mounts filesystems when the underlying block devices are
 ready, or when network interfaces come up, checking the filesystems
 first.

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 610
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.11+dfsg-4.1+deb8u1
Replaces: cpio-mt
Depends: libc6 (>= 2.17)
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: http://www.gnu.org/software/cpio/

Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 162
Maintainer: Marco d'Itri <md@linux.it>
Architecture: armhf
Multi-Arch: foreign
Version: 18-3
Replaces: module-init-tools (<< 4)
Depends: libc6 (>= 2.17), libkmod2 (= 18-3), lsb-base (>= 3.0-6)
Breaks: alsa-base (<= 1.0.25+3), module-init-tools (<< 4), oss-compat (= 4)
Conffiles:
 /etc/init.d/kmod 96948a484687c865b98806684649cee8
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
 It replaces module-init-tools.

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 29
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: attr
Version: 1:2.4.47-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/

Package: libk5crypto3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 268
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: armhf
Multi-Arch: same
Source: krb5
Version: 1.12.1+dfsg-19+deb8u2
Depends: libc6 (>= 2.4), libkeyutils1 (>= 1.4), libkrb5support0 (>= 1.12~alpha1+dfsg)
Pre-Depends: multiarch-support
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa)
Conflicts: libkrb53
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 72
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: same
Source: e2fsprogs
Version: 1.42.12-1.1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2, libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 292
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: armhf
Multi-Arch: same
Source: xz-utils
Version: 5.1.1alpha+20120614-2
Depends: libc6 (>= 2.13-28)
Pre-Depends: multiarch-support
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/

Package: inetutils-ping
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 283
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: armhf
Source: inetutils
Version: 2:1.9.2.39.3a460-3
Provides: ping
Depends: libc6 (>= 2.15), netbase
Conflicts: hurd (<= 20010718-1), ping
Description: ICMP echo tool
 Ping uses ICMP to send out echo requests, and uses the reply packets to
 calculate latency between the sending and the destination hosts.
 .
 This is the portable GNU implementation of ping.
Homepage: https://www.gnu.org/software/inetutils/

Package: apt-transport-https
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 181
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Source: apt
Version: 1.0.9.8.3
Depends: libapt-pkg4.12 (>= 1.0.9.8.3), libc6 (>= 2.4), libcurl3-gnutls (>= 7.16.2), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.9)
Description: https download transport for APT
 This package enables the usage of 'deb https://foo distro main' lines
 in the /etc/apt/sources.list so that all package managers using the
 libapt-pkg library can access metadata and packages available in sources
 accessible over https (Hypertext Transfer Protocol Secure).
 .
 This transport supports server as well as client authentication
 with certificates.

Package: klibc-utils
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 401
Maintainer: maximilian attems <maks@debian.org>
Architecture: armhf
Source: klibc
Version: 2.0.4-2+rpi1
Depends: libklibc (= 2.0.4-2+rpi1)
Breaks: initramfs-tools (<< 0.103)
Description: small utilities built with klibc for early boot
 This package contains a collection of programs that are linked
 against klibc. These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.
Homepage: http://git.kernel.org/?p=libs/klibc/klibc.git;a=summary

Package: gcc-4.8-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 172
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-4.8
Version: 4.8.4-1
Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: libhogweed2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 170
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: armhf
Multi-Arch: same
Source: nettle
Version: 2.7.1-5+deb8u1
Depends: libc6 (>= 2.4), libgmp10 (>= 2:6.0.0), libnettle4 (= 2.7.1-5+deb8u1)
Pre-Depends: multiarch-support
Description: low level cryptographic library (public-key cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the asymmetric cryptographic algorithms, which,
 require the GNU multiple precision arithmetic library (libgmp) for
 their large integer computations.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 180
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.1+deb8u1
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.4), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://pam.sourceforge.net/

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 853
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.20-4.1
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4), libpcre3 (>= 1:8.35)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: http://www.gnu.org/software/grep/

Package: ifupdown
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 110
Maintainer: Andrew Shadura <andrewsh@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 0.7.53.1
Replaces: netbase (<< 5.0)
Depends: iproute2 | iproute (>= 20071016-1), libc6 (>= 2.7), lsb-base (>= 4.1+Debian3), initscripts (>= 2.88dsf-25), adduser
Recommends: isc-dhcp-client | dhcp-client
Suggests: ppp, rdnssd, net-tools
Breaks: dhcp3-client (<< 4.0), netbase (<< 5.0)
Conffiles:
 /etc/default/networking 35cd4a2713981c9239ce4532c1bfc1c7
 /etc/init.d/networking 6b377b7e2cfece0c9d1c81f40002636f
 /etc/init/network-interface-container.conf 4daa570594afc50940f140a7731d20d1
 /etc/init/network-interface-security.conf feb6b4b52fe24c44ff1bc68addf245d6
 /etc/init/network-interface.conf aae12345eba8e946579b06798b1752c1
 /etc/init/networking.conf c50811e19bcd596d99b0467b40cfbb8b
 /etc/network/if-down.d/upstart 1a0205ddbc1446782a8d4d818e97d8a5
 /etc/network/if-up.d/upstart dfbcde4fd4a3a2553930605e03e160ab
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 478
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 22.21-2
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.8), libtinfo5
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/

Package: libssl1.0.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2236
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: openssl
Version: 1.0.1k-3+deb8u5
Depends: libc6 (>= 2.11), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 179
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 3.5.37
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libisccfg-export90
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: armhf
Source: bind9
Version: 1:9.9.5.dfsg-9+deb8u6
Depends: libc6 (>= 2.4), libisc-export95
Pre-Depends: multiarch-support
Description: Exported ISC CFG Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libisccfg shared library.

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 337
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: same
Source: e2fsprogs
Version: 1.42.12-1.1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: raspbian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 31
Maintainer: Peter Michael Green <plugwash@p10link.net>
Architecture: all
Version: 20120528.2
Provides: debian-archive-keyring
Depends: gnupg
Description: GnuPG archive keys of the raspbian archive
 The raspbian archive digitally signs its Release files. This package
 contains the archive keys used for that.

Package: libaura
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 192
Maintainer: Andrew 'Necromant' Andrianov <andrew@ncrmnt.org>
Architecture: armhf
Version: 0.1.1.131
Depends: libc6 (>= 2.8), libeasynmc, libelfg0 (>= 0.8.12), liblua5.2-0, libusb-1.0-0 (>= 2:1.0.16), lua5.2, libaura-scripts
Description: Universal RPC library to interface with different hardware (binary files)
 This library can kick ass ;)
Homepage: http://github.com/nekromant/aura

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 135
Maintainer: Clint Adams <clint@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.4
Replaces: manpages-pl (<< 1:0.5)
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which

Package: libsigc++-2.0-0c2a
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libsigc++-2.0
Version: 2.4.0-1
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.6)
Pre-Depends: multiarch-support
Description: type-safe Signal Framework for C++ - runtime
 This library implements a full callback system for use in widget
 libraries, abstract interfaces, and general programming. It provides
 the ability to connect an abstract callback to a class method,
 function, or function object, and contains adaptor classes for the
 connection of dissimilar callbacks.
 .
 These are the runtime files for libsigc++, needed only if you wish to
 run software which depends on it.

Package: libgcrypt20
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 685
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Version: 1.6.3-2+deb8u1
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.14)
Pre-Depends: multiarch-support
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Camellia, IDEA, Salsa, CRC, MD4, MD5, RIPE-MD160, SHA-1, SHA-256, SHA-512,
 Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC.
Homepage: http://directory.fsf.org/project/libgcrypt/

Package: libeasynmc
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 181
Maintainer: Andrew 'Necromant' Andrianov <andrew@ncrmnt.org>
Architecture: armhf
Source: nmc-utils
Version: 0.1.1.70
Depends: libc6 (>= 2.4), libelfg0 (>= 0.8.12)
Description: EasyNMC Interface for Neuromatrix DSP (Library)
 Ths package contains libeasynmc shared and static library
Homepage: http://github.com/RC-MODULE/nmc-utils

Package: libxapian22
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2266
Maintainer: Olly Betts <olly@survex.com>
Architecture: armhf
Source: xapian-core
Version: 1.2.19-1
Depends: libc6 (>= 2.15), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.9), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: xapian-tools
Description: Search engine library
 This package contains the core Xapian runtime library.
 .
 The Xapian search engine library is a highly adaptable toolkit which allows
 developers to easily add advanced indexing and search facilities to their own
 applications.  It implements the probabilistic model of information retrieval,
 and provides facilities for performing ranked free-text searches, relevance
 feedback, phrase searching, boolean searching, stemming, and simultaneous
 update and searching.  It is highly scalable, and is capable of working with
 collections containing hundreds of millions of documents.
Homepage: http://xapian.org/

Package: libncursesw5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 283
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: ncurses
Version: 5.9+20140913-1
Depends: libtinfo5 (= 5.9+20140913-1), libc6 (>= 2.15)
Pre-Depends: multiarch-support
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/

Package: curl
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 264
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 7.38.0-4+deb8u3
Depends: libc6 (>= 2.17), libcurl3 (= 7.38.0-4+deb8u3), zlib1g (>= 1:1.1.4)
Description: command line tool for transferring data with URL syntax
 curl is a command line tool for transferring data with URL syntax, supporting
 DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
 POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
 based upload, proxies, cookies, user+password authentication (Basic, Digest,
 NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
 busload of other useful tricks.
Homepage: http://curl.haxx.se

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 4836
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.3-11
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libncurses5 (>= 5.5-5~), libtinfo5
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/skel/.bashrc e62ae447bdd228160f1f0b6bab8a7fd3
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/bash.bashrc 87b895cef45b8090d628a1d9a0f4bfb8
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: isc-dhcp-common
Status: install ok installed
Priority: important
Section: net
Installed-Size: 406
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: armhf
Source: isc-dhcp
Version: 4.3.1-6+deb8u2
Depends: libc6 (>= 2.15), libdns-export100, libirs-export91, libisc-export95, debianutils (>= 2.8.2)
Description: common files used by all of the isc-dhcp packages
 This package includes all of the files that are used in common by the various
 ISC DHCP packages, such as the dhcp-eval and dhcp-options manpages and the
 OMAPI command shell.
Homepage: http://www.isc.org

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 84
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.25.2-6
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.

Package: libsigsegv2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 34
Maintainer: Debian Common Lisp Team <pkg-common-lisp-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libsigsegv
Version: 2.10-4
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Library for handling page faults in a portable way
 GNU libsigsegv is a library that allows handling page faults in a
 portable way. It is used e.g. for generational garbage collectors
 and stack overflow handlers.
 .
 This package contains the shared library.
Homepage: http://libsigsegv.sourceforge.net/

Package: libdb5.3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1520
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: db5.3
Version: 5.3.28-9
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html

Package: aura-cli
Status: install ok installed
Priority: optional
Section: unknown
Installed-Size: 44
Maintainer: Andrew 'Necromant' Andrianov <andrew@ncrmnt.org>
Architecture: armhf
Version: 0.1.29
Depends: libaura, libc6 (>= 2.4), libeasynmc, libelfg0 (>= 0.8.12), liblua5.2-0, libusb-1.0-0 (>= 2:1.0.8)
Description: Aura commandline client
 A console tool to work with remote aura nodes
Homepage: <insert the upstream URL, if relevant>

Package: libcurl3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 465
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Multi-Arch: same
Source: curl
Version: 7.38.0-4+deb8u3
Depends: libc6 (>= 2.17), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.10+dfsg~), libidn11 (>= 1.13), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), librtmp1 (>= 2.4+20131018.git79459a2-3~), libssh2-1 (>= 1.2.6), libssl1.0.0 (>= 1.0.1), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Recommends: ca-certificates
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se

Package: i2c-tools
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 177
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: armhf
Version: 3.1.1-1
Depends: libc6 (>= 2.7), perl, adduser, udev | makedev
Recommends: read-edid
Suggests: libi2c-dev, python-smbus
Conflicts: lm-sensors (<< 1:3.0.0-1)
Description: heterogeneous set of I2C tools for Linux
 This package contains a heterogeneous set of I2C tools for Linux: a bus
 probing tool, a chip dumper, register-level access helpers, EEPROM
 decoding scripts, and more.
Homepage: http://www.lm-sensors.org

Package: apt-utils
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 910
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Source: apt
Version: 1.0.9.8.3
Depends: apt, libapt-inst1.5 (>= 0.9.15.4), libapt-pkg4.12 (>= 0.9.16), libc6 (>= 2.4), libdb5.3, libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.9)
Description: package management related utility programs
 This package contains some less used commandline utilities related
 to package management with APT.
 .
  * apt-extracttemplates is used by debconf to prompt for configuration
    questions before installation.
  * apt-ftparchive is used to create Packages and other index files
    needed to publish an archive of debian packages
  * apt-sortpkgs is a Packages/Sources file normalizer.

Package: libeasynmc-examples
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 291
Maintainer: Andrew 'Necromant' Andrianov <andrew@ncrmnt.org>
Architecture: armhf
Source: nmc-utils
Version: 0.1.1.70
Depends: libeasynmc (= 0.1.1.70)
Description: EasyNMC Interface for Neuromatrix DSP (Example DSP applications)
 Ths package contains nmctl and nmrun applications
Homepage: http://github.com/RC-MODULE/nmc-utils

Package: libcap2-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 56
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: armhf
Multi-Arch: foreign
Source: libcap2
Version: 1:2.24-8
Replaces: libcap-bin
Depends: libc6 (>= 2.4), libcap2 (>= 1:2.10)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Homepage: http://sites.google.com/site/fullycapable/

Package: debconf
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 614
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.56
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/bash_completion.d/debconf 8fa1862734fbe54d7178aaaa419f5a11
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: debconf-i18n
Status: install ok installed
Priority: important
Section: localization
Installed-Size: 1091
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Source: debconf
Version: 1.5.56
Replaces: debconf (<< 1.3.0), debconf-utils (<< 1.3.22)
Depends: debconf (= 1.5.56), liblocale-gettext-perl, libtext-iconv-perl, libtext-wrapi18n-perl, libtext-charwidth-perl
Conflicts: debconf-english, debconf-utils (<< 1.3.22)
Description: full internationalization support for debconf
 This package provides full internationalization for debconf, including
 translations into all available languages, support for using translated
 debconf templates, and support for proper display of multibyte character
 sets.

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 131
Maintainer: Mark Brown <broonie@debian.org>
Architecture: armhf
Multi-Arch: same
Source: zlib
Version: 1:1.2.8.dfsg-2
Provides: libz1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

Package: libcurl3-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 445
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Multi-Arch: same
Source: curl
Version: 7.38.0-4+deb8u3
Depends: libc6 (>= 2.17), libcomerr2 (>= 1.01), libgnutls-deb0-28 (>= 3.3.0), libgssapi-krb5-2 (>= 1.10+dfsg~), libidn11 (>= 1.13), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libnettle4, librtmp1 (>= 2.4+20131018.git79459a2-3~), libssh2-1 (>= 1.2.6), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Recommends: ca-certificates
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 19
Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>
Architecture: armhf
Version: 3.15
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: multiarch-support
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 193
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: glibc
Version: 2.19-18+deb8u4
Depends: libc6 (>= 2.13-5)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 1518
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2016c-0+deb8u1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-jessie
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones

Package: init
Essential: yes
Status: install ok installed
Priority: required
Section: metapackages
Installed-Size: 5
Maintainer: pkg-systemd-maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: init-system-helpers
Version: 1.22
Pre-Depends: systemd-sysv | sysvinit-core | upstart
Description: System-V-like init utilities - metapackage
 This package is an essential metapackage which allows you to select from
 three available init systems in Debian (systemd, sysvinit, upstart) while
 ensuring that one of these is available on the system at all times.

Package: libklibc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 134
Maintainer: maximilian attems <maks@debian.org>
Architecture: armhf
Source: klibc
Version: 2.0.4-2+rpi1
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.
Homepage: http://git.kernel.org/?p=libs/klibc/klibc.git;a=summary

Package: systemd-sysv
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 38
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: systemd
Version: 215-17+deb8u4
Replaces: sysvinit (<< 2.88dsf-44~), sysvinit-core, upstart
Depends: systemd (= 215-17+deb8u4)
Pre-Depends: systemd
Conflicts: sysvinit-core, upstart
Description: system and service manager - SysV links
 systemd is a replacement for sysvinit.  It is dependency-based and
 able to read the LSB init script headers in addition to parsing rcN.d
 links as hints.
 .
 It also provides process supervision using cgroups and the ability to
 not only depend on other init script being started, but also
 availability of a given mount point or dbus service.
 .
 This package provides the manual pages and links needed for systemd
 to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
 link to systemd.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 175
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.3.3-17
Provides: awk
Pre-Depends: libc6 (>= 2.11)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 175
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: armhf
Version: 1.6-4
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.

Package: libelf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 946
Maintainer: Kurt Roeckx <kurt@roeckx.be>
Architecture: armhf
Multi-Arch: same
Source: elfutils
Version: 0.159-4.2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: library to read and write ELF files
 The libelf1 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://fedorahosted.org/elfutils/

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 356
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: gnupg
Version: 1.4.18-7+deb8u1
Depends: libbz2-1.0, libc6 (>= 2.4), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is a stripped-down version of gnupg which is only able to check
 signatures.  It is smaller than the full-blown gnupg and uses a
 different (and simpler) way to check that the public keys used to
 make the signature are trustworthy.
Homepage: http://www.gnupg.org

Package: libcap2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 24
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: armhf
Multi-Arch: same
Version: 1:2.24-8
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: http://sites.google.com/site/fullycapable/

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 160
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: util-linux (2.25.2-6)
Version: 1:2.25.2-6
Pre-Depends: libc6 (>= 2.15), libsystemd0
Recommends: bsdmainutils
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a
 Debian system: logger, renice, script, scriptreplay, and wall. The
 remaining standard BSD utilities are provided by bsdmainutils.

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 170
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: armhf
Version: 0.5.7-4
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.11)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: libsasl2-modules-db
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 78
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.26.dfsg1-13+deb8u1
Replaces: libsasl2-2 (<< 2.1.26.dfsg1-2~), libsasl2-modules (<< 2.1.26.dfsg1-6~)
Depends: libc6 (>= 2.4), libdb5.3
Breaks: libsasl2-2 (<< 2.1.26.dfsg1-2~)
Description: Cyrus SASL - pluggable authentication modules (DB)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the DB plugin, which supports Berkeley DB lookups.
Homepage: http://www.cyrusimap.org/

Package: gnupg
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 4701
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.4.18-7+deb8u1
Depends: gpgv, libbz2-1.0, libc6 (>= 2.15), libreadline6 (>= 6.0), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4)
Recommends: gnupg-curl, libldap-2.4-2 (>= 2.4.7)
Suggests: gnupg-doc, libpcsclite1, parcimonie, xloadimage | imagemagick | eog
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 GnuPG 1.4 is the standalone, non-modularized series. In contrast to
 the version 2 series, shipped with the gnupg2 package, it comes
 with no support for S/MIME and some other tools useful for desktop
 environments, but also with less dependencies.
 .
 The gnupg package is built without libcurl. So it does not support
 HKPS keyservers. Install the gnupg-curl package if you want to use
 the keyserver helper tools built with libcurl and supporting HKPS.
Homepage: http://www.gnupg.org

Package: perl-modules
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 15104
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.20.2-3+deb8u4
Replaces: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcgi-pm-perl, libcpan-meta-perl, libcpan-meta-requirements-perl, libcpan-meta-yaml-perl, libdigest-perl, libexperimental-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-spec-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-build-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libnet-perl, libnet-ping-perl, libpackage-constants-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libtest-harness-perl, libtest-simple-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, podlators-perl
Provides: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcpan-meta-perl, libcpan-meta-requirements-perl, libcpan-meta-yaml-perl, libdigest-perl, libexperimental-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-spec-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libtest-harness-perl, libtest-simple-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, podlators-perl
Depends: perl-base (>= 5.20.2-3+deb8u4)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.20.2-1), libarchive-extract-perl, libmodule-pluggable-perl, libpod-latex-perl, libterm-ui-perl, libtext-soundex-perl, libcgi-pm-perl, libmodule-build-perl, libpackage-constants-perl
Suggests: libb-lint-perl, libcpanplus-dist-build-perl, libcpanplus-perl, libfile-checktree-perl, liblog-message-simple-perl, liblog-message-perl, libobject-accessor-perl
Breaks: cli-common (<< 0.9+nmu1), libansicolor-perl (<< 4.02), libarchive-tar-perl (<< 1.96), libattribute-handlers-perl (<< 0.96), libautodie-perl (<< 2.23), libcgi-pm-perl (<< 3.65), libcpan-meta-perl (<< 2.140640), libcpan-meta-requirements-perl (<< 2.125), libcpan-meta-yaml-perl (<< 0.012), libdigest-perl (<< 1.17), libexperimental-perl (<< 0.007), libextutils-cbuilder-perl (<< 0.280217), libextutils-command-perl (<< 1.18), libextutils-install-perl (<< 1.67), libextutils-parsexs-perl (<< 3.240000), libfile-spec-perl (<< 3.4801), libhttp-tiny-perl (<< 0.043), libi18n-langtags-perl (<< 0.40), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27203), liblocale-codes-perl (<< 3.30), liblocale-maketext-perl (<< 1.25), liblocale-maketext-simple-perl (<< 0.21), libmath-bigint-perl (<< 1.9993), libmath-complex-perl (<< 1.59), libmodule-build-perl (<< 0.420500), libmodule-corelist-perl (<< 5.20150214), libmodule-load-conditional-perl (<< 0.62), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000019), libnet-perl (<= 1:1.22), libnet-ping-perl (<< 2.43), libpackage-constants-perl (<< 0.04), libparams-check-perl (<< 0.38), libparent-perl (<< 0.228), libparse-cpan-meta-perl (<< 1.4414), libperl-ostype-perl (<< 1.007), libpod-escapes-perl (<< 1.06), libpod-parser-perl (<< 1.62), libpod-simple-perl (<< 3.28), libtest-harness-perl (<< 3.30), libtest-simple-perl (<< 1.001002), libthread-queue-perl (<< 3.05), libtime-local-perl (<< 1.2300), libunicode-collate-perl (<< 1.04), libversion-perl (<< 1:0.9909), libversion-requirements-perl (<< 0.101022), mono-apache-server2 (<< 3.8-2.1), mono-apache-server4 (<< 3.8-2.1), mono-fastcgi-server2 (<< 3.8-2.1), mono-fastcgi-server4 (<< 3.8-2.1), patcher (<< 0.0.20040521-6.1), pdl (<< 1:2.007-4), perl (<< 5.20.2~), podlators-perl (<< 2.3.1), polygen-data (<< 1.0.6.ds2-13.1), pristine-tar (<< 1.33), pure-ftpd-common (<< 1.0.36-3.2), rinse (<< 3.0.7), shorewall (<< 4.6.4.3-2), shorewall-core (<< 4.6.4.3-2), tvtime (<< 1.0.2-14)
Conflicts: defoma (<< 0.11.12), mono-gac (<< 2.10.8.1-3)
Conffiles:
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules' directly, they
 should use `perl' (which depends on `perl-modules') instead.
Homepage: http://dev.perl.org/perl5/

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 317
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: util-linux
Version: 2.25.2-6
Pre-Depends: libc6 (>= 2.17), libmount1 (>= 2.25), libselinux1 (>= 2.0.15), libsmartcols1 (>= 2.25)
Suggests: nfs-common (>= 1:1.1.0-13)
Description: Tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: libsasl2-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 150
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.26.dfsg1-13+deb8u1
Replaces: libsasl2
Depends: libc6 (>= 2.15), libsasl2-modules-db (>= 2.1.26.dfsg1-13+deb8u1)
Pre-Depends: multiarch-support
Recommends: libsasl2-modules (>= 2.1.26.dfsg1-13+deb8u1)
Breaks: postfix (<= 2.8.3-1), slapd (<= 2.4.25-3)
Description: Cyrus SASL - authentication abstraction library
 This is the Cyrus SASL API implementation, version 2.1.
 .
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Homepage: http://www.cyrusimap.org/

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 169
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: systemd
Version: 215-17+deb8u4
Pre-Depends: libc6 (>= 2.9), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), multiarch-support
Description: systemd utility library
 The libsystemd0 library provides interfaces to various systemd components.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: u-boot-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 197
Maintainer: Vagrant Cascadian <vagrant@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: u-boot
Version: 2014.10+dfsg1-5+rpi1
Replaces: u-boot (<< 2010.12-2), uboot-envtools (<< 20081215-3~), uboot-mkimage (<= 0.4build1)
Depends: libc6 (>= 2.7)
Breaks: u-boot (<< 2010.12-2), uboot-envtools (<< 20081215-3~), uboot-mkimage (<= 0.4build1)
Description: companion tools for Das U-Boot bootloader
 This package includes the mkimage program, which allows generation of U-Boot
 images in various formats, and the fw_printenv and fw_setenv programs to read
 and modify U-Boot's environment.
Homepage: http://www.denx.de/wiki/U-Boot/

Package: libpsl0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 419
Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>
Architecture: armhf
Multi-Arch: same
Source: libpsl
Version: 0.5.1-1
Depends: libc6 (>= 2.8), libicu52 (>= 52~m1-1~)
Description: Library for Public Suffix List (shared libraries)
 Libpsl allows checking domains against the Public Suffix List,
 It can be used to avoid privacy-leaking 'super-cookies',
 'super domain' certificates, for domain highlighting purposes
 sorting domain lists by site and more.
 .
 This package contains runtime libraries.
Homepage: https://github.com/rockdaboot/libpsl

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 8810
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: glibc
Version: 2.19-18+deb8u4
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.19), locales-all (<< 2.19), nscd (<< 2.19)
Conflicts: prelink (<= 0.0.20090311-1), tzdata (<< 2007k-1), tzdata-etch
Conffiles:
 /etc/ld.so.conf.d/arm-linux-gnueabihf.conf fcce838d54cc444500f01049db2aae8c
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libprocps3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 91
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: procps
Version: 2:3.3.9-9
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compilied with libprocps.
Homepage: http://gitorious.org/procps

Package: libboost-iostreams1.55.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 116
Maintainer: Debian Boost Team <pkg-boost-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: boost1.55
Version: 1.55.0+dfsg-3
Depends: libbz2-1.0, libc6 (>= 2.4), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.3.0), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Description: Boost.Iostreams Library
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Iostreams are a collection of concepts and a set of templates
 which turn models of these concepts into C++ standard library streams
 and stream buffers.
Homepage: http://www.boost.org/libs/iostreams/

Package: startpar
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 42
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: armhf
Version: 0.59-3
Replaces: sysvinit-utils (<< 2.88dsf-52)
Depends: libc6 (>= 2.15)
Suggests: insserv, sysv-rc
Breaks: sysvinit-utils (<< 2.88dsf-52)
Conffiles:
 /etc/init/startpar-bridge.conf 152b77b1904939b461edc251844d0008
Description: run processes in parallel and multiplex their output
 Used by the sysv-rc boot system executor to run init.d scripts in parallel
 while making sure the script output is not completely messed up.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libirs-export91
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: armhf
Source: bind9
Version: 1:9.9.5.dfsg-9+deb8u6
Depends: libc6 (>= 2.4), libdns-export100, libisc-export95, libisccfg-export90
Pre-Depends: multiarch-support
Description: Exported IRS Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libirs shared library.

Package: initramfs-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 347
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.120+deb8u1
Provides: linux-initramfs-tool
Depends: klibc-utils (>= 2.0-1~), cpio, kmod | module-init-tools, udev, klibc-utils (>= 2.0.4-1.2~) | busybox (>= 1:1.01-3) | busybox-initramfs | busybox-static
Recommends: busybox (>= 1:1.01-3) | busybox-initramfs | busybox-static
Suggests: bash-completion
Breaks: console-setup (<< 1.72), cryptsetup (<< 2:1.6.6-4~), elilo (<< 3.12-3.1~), lilo (<< 22.8-8.2~), lvm2 (<< 2.02.111-2.1~), s390-tools (<< 1.8.3-2~), systemd-sysv (<< 186)
Conflicts: linux-initramfs-tool, usplash (<< 0.5.50)
Conffiles:
 /etc/bash_completion.d/initramfs-tools 7eeb7184772f3658e7cf446945c096b1
 /etc/initramfs-tools/initramfs.conf 42161705437308c44abc6d46395889c1
 /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
 /etc/kernel/postinst.d/initramfs-tools 1d77d3e4b57c3da299aacd44b1dc207c
 /etc/kernel/postrm.d/initramfs-tools f57d0b03f79fd46dd1a1fa3b00206070
Description: generic modular initramfs generator
 This package contains tools to create a bootable initramfs for Linux kernel
 packages. The initramfs is a compressed cpio archive. At boot time, the
 kernel unpacks that archive into RAM, mounts and uses it as initial root file
 system. The mounting of the real root file system occurs in early user space.
 klibc provides utilities to setup root. Having the root on MD, LVM2, LUKS or
 NFS is also supported.
 Any boot loader with initrd support is able to load an initramfs archive.

Package: libpcre3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 572
Maintainer: Mark Baker <mark@mnb.org.uk>
Architecture: armhf
Multi-Arch: same
Source: pcre3
Version: 2:8.35-3.3+deb8u4
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries.

Package: librtmp1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 111
Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: rtmpdump
Version: 2.4+20150115.gita107cef-1
Depends: libc6 (>= 2.7), libgmp10, libgnutls-deb0-28 (>= 3.3.0), libhogweed2, libnettle4, zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Description: toolkit for RTMP streams (shared library)
 A small dumper for media content streamed over the RTMP protocol (like BBC's
 iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
 flv file, which can be played/transcoded with standard tools.
 .
 This package contains the shared libraries, header files needed by
 programs that want to use librtmp.
Homepage: http://rtmpdump.mplayerhq.hu/

Package: libdevmapper1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 340
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: lvm2 (2.02.111-2.2)
Version: 2:1.02.90-2.2
Depends: libc6 (>= 2.4), libselinux1 (>= 1.32), libudev1 (>= 183), dmsetup (>= 2:1.02.90-2.2)
Pre-Depends: multiarch-support
Breaks: lvm2 (<< 2.02.66)
Conflicts: libdevmapper1.02
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: http://sources.redhat.com/lvm2/

Package: aptitude
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 3839
Maintainer: Aptitude Development Team <aptitude-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 0.6.11-1
Depends: aptitude-common (= 0.6.11-1), libapt-pkg4.12 (>= 0.9.16), libboost-iostreams1.55.0, libc6 (>= 2.4), libcwidget3, libgcc1 (>= 1:4.4.0), libncursesw5 (>= 5.6+20070908), libsigc++-2.0-0c2a (>= 2.2.0), libsqlite3-0 (>= 3.6.5), libstdc++6 (>= 4.6), libtinfo5, libxapian22
Recommends: aptitude-doc-en | aptitude-doc, sensible-utils, libparse-debianchangelog-perl
Suggests: tasksel, debtags, apt-xapian-index
Conffiles:
 /etc/cron.daily/aptitude f934222d5eb13cb132e2751bdb023318
 /etc/logrotate.d/aptitude fb66bc5dc8c13edbcb83cea15ff86959
Description: terminal-based package manager
 aptitude is a package manager with a number of useful features,
 including: a mutt-like syntax for matching packages in a flexible
 manner, dselect-like persistence of user actions, the ability to
 retrieve and display the Debian changelog of most packages, and a
 command-line mode similar to that of apt-get.
 .
 aptitude is also Y2K-compliant, non-fattening, naturally cleansing,
 and housebroken.
Homepage: http://aptitude.alioth.debian.org/

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 12955
Maintainer: Michael Stone <mstone@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 8.23-4
Replaces: mktemp, realpath, timeout
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils

Package: libdns-export100
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1128
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: armhf
Source: bind9
Version: 1:9.9.5.dfsg-9+deb8u6
Depends: libc6 (>= 2.4), libisc-export95
Pre-Depends: multiarch-support
Description: Exported DNS Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libdns shared library.

Package: gawk
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 1736
Maintainer: Arthur Loiret <aloiret@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1:4.1.1+dfsg-1
Provides: awk
Pre-Depends: libc6 (>= 2.15), libgmp10, libmpfr4 (>= 3.1.2), libreadline6 (>= 6.0), libsigsegv2 (>= 2.9)
Suggests: gawk-doc
Description: GNU awk, a pattern scanning and processing language
 `awk', a program that you can use to select particular records in a
 file and perform operations upon them.
 .
 Gawk is the GNU Project's implementation of the AWK programming language.
 It conforms to the definition of the language in the POSIX 1003.2 Command
 Language And Utilities Standard. This version in turn is based on the
 description in The AWK Programming Language, by Aho, Kernighan, and
 Weinberger, with the additional features defined in the System V Release
 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
 extensions, and some GNU-specific extensions.
Homepage: http://www.gnu.org/software/gawk/

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 962
Maintainer: Debian iproute2 Maintainers <ah-iproute@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 3.16.0-2
Replaces: iproute
Provides: arpd
Depends: libc6 (>= 2.14), libdb5.3, libselinux1 (>= 2.0.15)
Recommends: libatm1 (>= 2.4.1-17~), libxtables10
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
 /etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/rt_dsfield 4264d5c7c8298300185aa04e1a736934
 /etc/iproute2/rt_protos 95ce0b4b5b79f5a8a45941fb418a904c
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: http://www.linux-foundation.org/en/Net:Iproute2

Package: libbsd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 111
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libbsd
Version: 0.7.0-2
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: utility functions from BSD systems - shared library
 This library provides some C functions such as strlcpy() that are commonly
 available on BSD systems but not on others like GNU systems.
 .
 For a detailed list of the provided functions, please see the libbsd-dev
 package description.
Homepage: http://libbsd.freedesktop.org/

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2687
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: foreign
Version: 1.42.12-1.1
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.42.12-1.1), libblkid1 (>= 2.17.2), libc6 (>= 2.11), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1)
Suggests: gpart, parted, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf e2cdbf0620e93949af5857eb4739f949
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net

Package: libpng12-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 238
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libpng
Version: 1.2.50-2+deb8u2
Replaces: libpng12-dev (<= 1.2.8rel-7)
Depends: libc6 (>= 2.11), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Conflicts: libpng12-dev (<= 1.2.8rel-7), mzscheme (<= 1:209-5), pngcrush (<= 1.5.10-2), pngmeta (<= 1.11-3), povray-3.5 (<= 3.5.0c-10), qemacs (<= 0.3.1-5)
Description: PNG library - runtime
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the runtime library files needed to run software
 using libpng.
Homepage: http://libpng.org/pub/png/libpng.html

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2181
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: armhf
Multi-Arch: foreign
Version: 1.27.1-2
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: libkrb5support0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 123
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: armhf
Multi-Arch: same
Source: krb5
Version: 1.12.1+dfsg-19+deb8u2
Depends: libc6 (>= 2.4), libkeyutils1 (>= 1.4)
Pre-Depends: multiarch-support
Breaks: libgssapi-krb5-2 (<< 1.12.1+dfsg-8), libk5crypto3 (<< 1.12.1+dfsg-8), libkadm5clnt-mit9 (<< 1.12.1+dfsg-8), libkadm5srv-mit9 (<< 1.12.1+dfsg-8), libkdb5-7 (<< 1.12.1+dfsg-8)
Conflicts: libkrb53
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 81
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: bzip2
Version: 1.0.6-7
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: libkmod2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 89
Maintainer: Marco d'Itri <md@linux.it>
Architecture: armhf
Multi-Arch: same
Source: kmod
Version: 18-3
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.

Package: mtd-utils
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 634
Maintainer: Riku Voipio <riku.voipio@linaro.org>
Architecture: armhf
Version: 1:1.5.1-1
Replaces: mtd-tools
Provides: mtd-tools
Depends: libc6 (>= 2.4), liblzo2-2, libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Description: Memory Technology Device Utilities
 Utilities for manipulating memory technology devices, such as flash
 memory, Disk-On-Chip, or ROM.  Includes mkfs.jffs2, a tool to create
 JFFS2 (journaling flash file system) filesystems.
Homepage: http://www.linux-mtd.infradead.org/

Package: aptitude-common
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 9930
Maintainer: Aptitude Development Team <aptitude-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: aptitude
Version: 0.6.11-1
Replaces: aptitude (<< 0.6.8-1)
Recommends: aptitude
Breaks: aptitude (<< 0.6.8-1)
Description: architecture independent files for the aptitude package manager
 aptitude is a package manager with a number of useful features,
 including: a mutt-like syntax for matching packages in a flexible
 manner, dselect-like persistence of user actions, the ability to
 retrieve and display the Debian changelog of most packages, and a
 command-line mode similar to that of apt-get.
 .
 This package contains the data files and translations used by
 aptitude.
Homepage: http://aptitude.alioth.debian.org/

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 288
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.25.2-6
Depends: libc6 (>= 2.17), libuuid1 (>= 2.16)
Pre-Depends: multiarch-support
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifying
 filesystems by hard-coded device names, but via a logical naming
 system instead.

Package: libtasn1-6
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 83
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Version: 4.2-3+deb8u2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: http://www.gnu.org/software/libtasn1/

Package: libdrm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 69
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libdrm
Version: 2.4.58-2
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: Userspace interface to kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides the runtime environment for libdrm.

Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 511
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: armhf
Source: isc-dhcp
Version: 4.3.1-6+deb8u2
Provides: dhcp-client
Depends: libc6 (>= 2.15), libdns-export100, libirs-export91, libisc-export95, debianutils (>= 2.8.2), isc-dhcp-common (= 4.3.1-6+deb8u2), iproute2
Suggests: resolvconf, avahi-autoipd
Conffiles:
 /etc/dhcp/dhclient-enter-hooks.d/debug 72de8917c04f1dd3003459b35adcc66d
 /etc/dhcp/dhclient-exit-hooks.d/debug 72de8917c04f1dd3003459b35adcc66d
 /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 9f5b3bd5f605e2debf1a7a88a705c1ba
 /etc/dhcp/dhclient.conf ed8f55fbf1e31a2ab1ac263818c99773
Description: DHCP client for automatically obtaining an IP address
 This is the Internet Software Consortium's DHCP client.
 .
 Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
 (actually dhcpd includes much of the functionality of bootpd). It
 gives client machines "leases" for IP addresses and can
 automatically set their network configuration. If your machine
 depends on DHCP (especially likely if it's a workstation on a large
 network, or a laptop, or attached to a cable modem), keep this or
 another DHCP client installed.
 .
 Extra documentation can be found in the package isc-dhcp-common.
Homepage: http://www.isc.org

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 72
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 4.1+Debian13+rpi1+nmu1
Description: Linux Standard Base 4.1 init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 494
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2:3.3.9-9
Provides: watch
Depends: libc6 (>= 2.15), libncurses5 (>= 5.5-5~), libncursesw5 (>= 5.6+20070908), libprocps3, libtinfo5, lsb-base (>= 3.0-10), initscripts
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1), xmem (<= 1.20-27.1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
 /etc/init.d/procps 021482ebab1024f5ed76e650e5191e8f
 /etc/sysctl.conf 76c1d8285c578d5e827c3e07b9738112
 /etc/sysctl.d/README.sysctl 026e08987e39bd612ae311f2d9fc2089
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: http://gitorious.org/procps

Package: libgssapi-krb5-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 326
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: armhf
Multi-Arch: same
Source: krb5
Version: 1.12.1+dfsg-19+deb8u2
Depends: libc6 (>= 2.4), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.8+dfsg), libkeyutils1 (>= 1.4), libkrb5-3 (= 1.12.1+dfsg-19+deb8u2), libkrb5support0 (>= 1.12~alpha1+dfsg)
Pre-Depends: multiarch-support
Suggests: krb5-doc, krb5-user
Breaks: libgssglue1 (<< 0.2-2)
Conffiles:
 /etc/gss/mech.d/README 27e753ba1dc72900d2892b8efef6e35e
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 10762
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: armhf
Multi-Arch: allowed
Version: 5.20.2-3+deb8u4
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libmodule-corelist-perl (<< 2.14-2), libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl-base (<< 5.10.1-12), perl-doc (<< 5.8.0-1), perl-modules (<< 5.8.1-1)
Provides: data-dumper, libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl5
Depends: perl-base (= 5.20.2-3+deb8u4), perl-modules (>= 5.20.2-3+deb8u4), libbz2-1.0, libc6 (>= 2.11), libdb5.3, libgdbm3 (>= 1.8.3), zlib1g (>= 1:1.2.2.3)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: netbase, rename
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make
Breaks: dh-make-perl (<< 0.73-1), ftpmirror (<< 1.96+dfsg-13), libcompress-raw-bzip2-perl (<< 2.064), libcompress-raw-zlib-perl (<< 2.065), libcompress-zlib-perl (<< 2.064), libdigest-md5-perl (<< 2.53), libdigest-sha-perl (<< 5.88), libencode-perl (<< 2.63-1+deb8u1), libhtml-template-compiled-perl (<< 0.95-1), libio-compress-base-perl (<< 2.064), libio-compress-bzip2-perl (<< 2.064), libio-compress-perl (<< 2.064), libio-compress-zlib-perl (<< 2.064), libload-perl (<< 0.20-1), libmime-base64-perl (<< 3.14), libnet-jifty-perl (<< 0.14-1), libperl-apireference-perl (<< 0.09-1), libregexp-optimizer-perl (<< 0.15-3), libsoap-lite-perl (<< 0.712-4), libstorable-perl (<< 2.49.01), libsys-syslog-perl (<< 0.33), libthreads-perl (<< 1.93), libthreads-shared-perl (<< 1.46), libtime-hires-perl (<< 1.9726), libtime-piece-perl (<< 1.27), libxml-parser-lite-tree-perl (<< 0.14-1), libyaml-perl (<< 0.73-1), mrtg (<< 2.16.3-3.1), perl-doc (<< 5.20.2-1)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Description: Larry Wall's Practical Extraction and Report Language
 Perl is a highly capable, feature-rich programming language with over
 20 years of development. Perl 5 runs on over 100 platforms from
 portables to mainframes. Perl is suitable for both rapid prototyping
 and large scale development projects.
 .
 Perl 5 supports many programming styles, including procedural,
 functional, and object-oriented. In addition to this, it is supported
 by an ever-growing collection of reusable modules which accelerate
 development. Some of these modules include Web frameworks, database
 integration, networking protocols, and encryption. Perl provides
 interfaces to C and C++ for custom extension development.
Homepage: http://dev.perl.org/perl5/

Package: libgpg-error0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 426
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libgpg-error
Version: 1.17-3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Homepage: http://www.gnupg.org/related_software/libgpg-error/

Package: plymouth
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 507
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: armhf
Version: 0.9.0-9
Replaces: plymouth-drm (<< 0.9.0-6~), plymouth-themes (<< 0.9.0-8~)
Depends: libc6 (>= 2.10), libdrm2 (>= 2.4.25), libpng12-0 (>= 1.2.13-4), libudev1 (>= 183), initramfs-tools | dracut, init-system-helpers (>= 1.18)
Pre-Depends: multiarch-support
Suggests: desktop-base, plymouth-themes
Breaks: plymouth-drm (<< 0.9.0-6~), plymouth-themes (<< 0.9.0-8~)
Conflicts: console-common
Conffiles:
 /etc/init.d/plymouth e1440675aa15e8e43da91575295fd2d1
 /etc/init.d/plymouth-log 0f1be14b21796a952e115c03a86787e0
 /etc/plymouth/plymouthd.conf 5c2a5b4b4cb7cbbad0beaab8558200ce
Description: boot animation, logger and I/O multiplexer
 Plymouth provides a boot-time I/O multiplexing framework - the most obvious
 use for which is to provide an attractive graphical animation in place of
 the text messages that normally get shown during boot. (The messages are
 instead redirected to a logfile for later viewing.) However, in event-driven
 boot systems Plymouth can also usefully handle user interaction such as
 password prompts for encrypted file systems.
 .
 This package provides the basic framework, enabling a text-mode animation.
Homepage: http://www.freedesktop.org/wiki/Software/Plymouth

Package: nano
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1324
Maintainer: Jordi Mallach <jordi@debian.org>
Architecture: armhf
Version: 2.2.6-3
Replaces: pico
Provides: editor
Depends: dpkg (>= 1.15.4) | install-info, libc6 (>= 2.11), libncursesw5 (>= 5.6+20070908), libtinfo5
Suggests: spell
Breaks: alpine-pico (<= 2.00+dfsg-5)
Conflicts: pico
Conffiles:
 /etc/nanorc fc57b93c907fefbccf12317d40b4a204
Description: small, friendly text editor inspired by Pico
 GNU nano is an easy-to-use text editor originally designed as a replacement
 for Pico, the ncurses-based editor from the non-free mailer package Pine
 (itself now available under the Apache License as Alpine).
 .
 However, nano also implements many features missing in pico, including:
  - feature toggles;
  - interactive search and replace (with regular expression support);
  - go to line (and column) command;
  - auto-indentation and color syntax-highlighting;
  - filename tab-completion and support for multiple buffers;
  - full internationalization support.
Homepage: http://www.nano-editor.org/

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 413
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 8+rpi1
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version 7d853d51115a660afdd028c89a4f7761
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/dpkg/origins/raspbian 759c556ddf77629de852f78389ad87ce
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue 2cf1bb0be14146c214461ea6531f09a2
 /etc/issue.net 6df8f2e818bfeb64325ba8af86b29bb6
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.

Package: libgmp10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 454
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gmp
Version: 2:6.0.0+dfsg-6+rpi1
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
Homepage: http://gmplib.org/

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 110
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.9
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager

Package: libisc-export95
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 313
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: armhf
Source: bind9
Version: 1:9.9.5.dfsg-9+deb8u6
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Description: Exported ISC Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libisc shared library.

Package: libssh2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 199
Maintainer: Mikhail Gusarov <dottedmag@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libssh2
Version: 1.4.3-4.1+deb8u1
Depends: libc6 (>= 2.4), libgcrypt20 (>= 1.6.1), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Description: SSH2 client-side library
 libssh2 is a client-side C library implementing the SSH2 protocol.
 It supports regular terminal, SCP and SFTP (v1-v5) sessions;
 port forwarding, X11 forwarding; password, key-based and
 keyboard-interactive authentication.
 .
 This package contains the runtime library.
Homepage: http://libssh2.org/

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1857
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: shadow
Version: 1:4.2-3+deb8u1
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.8), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules, debianutils (>= 2.15.2)
Conffiles:
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: http://pkg-shadow.alioth.debian.org/

Package: init-system-helpers
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 97
Maintainer: pkg-systemd-maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.22
Depends: perl-base (>= 5.20.1-3)
Breaks: systemd (<< 44-12)
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e.g. sysvinit, upstart,
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.

Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 801
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: openssh
Version: 1:6.7p1-5+deb8u2
Replaces: ssh, ssh-krb5
Provides: ssh-server
Depends: libc6 (>= 2.17), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.12.1+dfsg-2), libkrb5-3 (>= 1.6.dfsg.2), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.1), libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), openssh-client (= 1:6.7p1-5+deb8u2), libpam-runtime (>= 0.76-14), libpam-modules (>= 0.72-9), adduser (>= 3.9), dpkg (>= 1.9.0), lsb-base (>= 4.1+Debian3), procps, openssh-sftp-server
Recommends: xauth, ncurses-term
Suggests: ssh-askpass, rssh, molly-guard, ufw, monkeysphere
Conflicts: sftp, ssh-socks, ssh2
Conffiles:
 /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
 /etc/init.d/ssh aca247a51227a8f8b37a8c2a4a703571
 /etc/init/ssh.conf 9e5ed011987e63f8035fb847170dfa3f
 /etc/network/if-up.d/openssh-server 615af9ea3307b85023a35f4ed3c8ff96
 /etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812
 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: http://www.openssh.org/

Package: libusb-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 94
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libusb-1.0
Version: 2:1.0.19-1
Depends: libc6 (>= 2.17), libudev1 (>= 183)
Pre-Depends: multiarch-support
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
 .
 This package contains what you need to run programs that use this
 library.
Homepage: http://www.linux-usb.org/

Package: openssh-sftp-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 77
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:6.7p1-5+deb8u2
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: libc6 (>= 2.17), openssh-client (= 1:6.7p1-5+deb8u2)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Enhances: openssh-server, ssh-server
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
Homepage: http://www.openssh.org/

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 371
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 5.9+20140913-1
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: http://invisible-island.net/ncurses/

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 2917
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: glibc
Version: 2.19-18+deb8u4
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>> 2.19), libc6 (<< 2.20)
Breaks: libc0.1 (<< 2.10), libc0.3 (<< 2.10), libc6 (<< 2.10), libc6.1 (<< 2.10)
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libsemanage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 193
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libsemanage
Version: 2.3-1
Depends: libsemanage-common (= 2.3-1), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.8), libselinux1 (>= 2.1.12), libsepol1 (>= 2.1.4), libustr-1.0-1 (>= 1.0.4)
Pre-Depends: multiarch-support
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 5806
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: systemd
Version: 215-17+deb8u4
Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libkmod2 (>= 5~), libselinux1 (>= 2.0.65), libudev1 (= 215-17+deb8u4), adduser, lsb-base (>= 3.0-6), util-linux (>= 2.16), procps
Pre-Depends: debconf (>= 1.4.69) | debconf-2.0
Breaks: consolekit (<< 0.4.6-1), kmod (<< 14), plymouth (<< 0.9.0-7), systemd (<< 215-1)
Conffiles:
 /etc/init.d/udev 988e81a81706a99e7f4b83988b386b00
 /etc/init.d/udev-finish fd3ce194c134bcd790681ea487b19126
 /etc/init/udev-fallback-graphics.conf b8bfe7164e10cd0e53494b243c5728b1
 /etc/init/udev-finish.conf 089140a32d519840674be9a274da1a42
 /etc/init/udev.conf 41c0081f3a830e0902aaff76a53edf98
 /etc/init/udevmonitor.conf b541dfb5aa4958e9a5336ecaec00ca15
 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18
 /etc/modprobe.d/fbdev-blacklist.conf 0b9c466830040ec52986cc3ea117bef5
 /etc/udev/udev.conf ae415f84e2967eff580089fb08aa0a61
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: libnettle4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 291
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: armhf
Multi-Arch: same
Source: nettle
Version: 2.7.1-5+deb8u1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: libldap-2.4-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 404
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: openldap
Version: 2.4.40+dfsg-1
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.12), libgnutls-deb0-28 (>= 3.3.0), libsasl2-2
Pre-Depends: multiarch-support
Conflicts: ldap-utils (<= 2.1.23-1)
Conffiles:
 /etc/ldap/ldap.conf 0b3f4d19d88498314478273ce10b0a70
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: http://www.openldap.org/

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 130
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: armhf
Source: sysvinit
Version: 2.88dsf-59
Replaces: last, sysvinit (<= 2.86.ds1-65)
Depends: libc6 (>= 2.7), libselinux1 (>= 1.32), startpar
Suggests: bootlogd, sash
Breaks: upstart (<< 1.5-0ubuntu5)
Conflicts: chkconfig (<< 11.0-79.1-2), last, startpar (<< 0.58-2), sysvconfig
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, last, lastb, mesg, pidof, service, sulogin
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: xz-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 466
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: armhf
Multi-Arch: foreign
Version: 5.1.1alpha+20120614-2
Replaces: lzip (<< 1.8~rc2), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.13-28), libgcc1 (>= 1:4.4.0), liblzma5 (>= 5.1.1alpha+20120614)
Breaks: lzip (<< 1.8~rc2)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Homepage: http://tukaani.org/xz/

Package: libtext-iconv-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 26
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Source: libtext-iconv-perl (1.7-5)
Version: 1.7-5+b5
Depends: libc6 (>= 2.4), perl-base (>= 5.20.0-4), perlapi-5.20.0
Description: converts between character sets in Perl
 The iconv() family of functions from XPG4 defines an API for converting
 between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
 are provided by libc6.
 .
 This package allows access to them from Perl via the Text::Iconv
 package.
Homepage: http://search.cpan.org/search?module=Text::Iconv

Package: libaura-scripts
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 50
Maintainer: Andrew 'Necromant' Andrianov <andrew@ncrmnt.org>
Architecture: all
Source: libaura
Version: 0.1.1.131
Depends: libaura (= 0.1.1.131)
Description: Universal RPC library to interface with different hardware (lua scripts)
 This library can kick ass ;)
Homepage: http://github.com/nekromant/aura

Package: lua5.2
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 250
Maintainer: Enrico Tassi <gareuselesinge@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 5.2.3-1.1
Provides: lua
Depends: libc6 (>= 2.7), libreadline6 (>= 6.0)
Description: Simple, extensible, embeddable programming language
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains the Lua command line interpreter and bytecode compiler.
 Install it if you are developing or using Lua scripts.
Homepage: http://www.lua.org

Package: libapt-inst1.5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 340
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: apt
Version: 1.0.9.8.3
Depends: libapt-pkg4.12 (>= 0.8.16~exp9), libc6 (>= 2.4), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.4.0)
Pre-Depends: multiarch-support
Description: deb package format runtime library
 This library provides methods to query and extract information
 from deb packages. This includes the control data and the package
 file content.

Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 53
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Version: 0.06-7
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
 This module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth
 characters such as east Asian characters, combining characters
 such as diacritical marks and Thai, and languages which don't
 use whitespaces between words such as Chinese and Japanese.
 .
 It provides wrap().
Homepage: http://search.cpan.org/search?module=Text::WrapI18N

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.3-1
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
 /etc/selinux/semanage.conf e69d42a4d98a93c3b8e201bdda367c55
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: libp11-kit0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 216
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: p11-kit
Version: 0.20.7-1
Depends: libc6 (>= 2.16), libffi6 (>= 3.0.4)
Pre-Depends: multiarch-support
Description: Library for loading and coordinating access to PKCS#11 modules - runtime
 Provides a way to load and enumerate PKCS#11 modules. Provides a standard
 configuration setup for installing PKCS#11 modules in such a way that
 they're discoverable.
 .
 Also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Homepage: http://p11-glue.freedesktop.org/p11-kit.html

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cdebconf
Version: 0.192
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. This is a reimplementation of the original debconf version
 in C.
 .
 This is the libraries needed by libdebconfclient-dev and cdebconf.

Package: libgnutls-deb0-28
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1669
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gnutls28
Version: 3.3.8-6+deb8u3
Replaces: gnutls0, gnutls0.4, gnutls3
Depends: libc6 (>= 2.17), libgmp10 (>= 2:6), libhogweed2 (>= 2.7), libnettle4 (>= 2.7), libp11-kit0 (>= 0.20.7), libtasn1-6 (>= 4.1-0), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Suggests: gnutls-bin
Conflicts: gnutls0, gnutls0.4
Description: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - TLS extensions: server name indication, max record size, opaque PRF
    input, etc.
  - authentication using the SRP protocol.
  - authentication using both X.509 certificates and OpenPGP keys.
  - TLS Pre-Shared-Keys (PSK) extension.
  - Inner Application (TLS/IA) extension.
  - X.509 and OpenPGP certificate handling.
  - X.509 Proxy Certificates (RFC 3820).
  - all the strong encryption algorithms (including SHA-256/384/512 and
    Camellia (RFC 4132)).
 .
 This package contains the main runtime library.
Homepage: http://www.gnutls.org/

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 152
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libselinux
Version: 2.3-2
Depends: libc6 (>= 2.8), libpcre3 (>= 8.10)
Pre-Depends: multiarch-support
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: http://userspace.selinuxproject.org/

Package: systemd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 10440
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Version: 215-17+deb8u4
Depends: libacl1 (>= 2.2.51-8), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.19.1), libcap2 (>= 1:2.10), libcryptsetup4 (>= 2:1.4.3), libkmod2 (>= 5~), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.1.9), libsystemd0 (= 215-17+deb8u4), util-linux (>= 2.19.1-2), mount (>= 2.21), initscripts (>= 2.88dsf-53.2), sysv-rc, udev (>= 208-8), acl, adduser, libcap2-bin
Pre-Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32)
Recommends: libpam-systemd, dbus
Suggests: systemd-ui
Breaks: lsb-base (<< 4.1+Debian4), lvm2 (<< 2.02.104-1), systemd-shim (<< 8-2)
Conflicts: klogd
Conffiles:
 /etc/dbus-1/system.d/org.freedesktop.hostname1.conf f55c94d000b5d62b5f06d38852977dd1
 /etc/dbus-1/system.d/org.freedesktop.locale1.conf 5893ab03e7e96aa3759baceb4dd04190
 /etc/dbus-1/system.d/org.freedesktop.login1.conf 96bf488f3da8f0ca813cc78e71eeb605
 /etc/dbus-1/system.d/org.freedesktop.machine1.conf d658acaf7192de735ab798c58ab149ae
 /etc/dbus-1/system.d/org.freedesktop.systemd1.conf 46533268285a0df22b1f1667ddc05642
 /etc/dbus-1/system.d/org.freedesktop.timedate1.conf 682369fbf3de26b21e775732c89a2bbe
 /etc/pam.d/systemd-user aebb8b8a2c698614b00961f327a683ef
 /etc/systemd/bootchart.conf 838a83315ad2f9d4c4b7f20b7475ba28
 /etc/systemd/journald.conf 51f19202dcc5aff6d2c3448dbf92f354
 /etc/systemd/logind.conf 747ae2312b6922546190bf806d8d12be
 /etc/systemd/resolved.conf 81a9c57d4eb587decc49040595674c5a
 /etc/systemd/system.conf 3d0e13a72d72acb55409a831b72a15e6
 /etc/systemd/timesyncd.conf 605e4f25097b8ea22f2f5cb3fde3f13c
 /etc/systemd/user.conf 9eaad8fbb7bb6230d4b28abb76b4e81c
Description: system and service manager
 systemd is a replacement for sysvinit.  It is dependency-based and
 able to read the LSB init script headers in addition to parsing rcN.d
 links as hints.
 .
 It also provides process supervision using cgroups and the ability to
 not only depend on other init script being started, but also
 availability of a given mount point or dbus service.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/bin/systemd or install systemd-sysv in addition.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6432
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: armhf
Multi-Arch: foreign
Version: 1.17.26
Replaces: manpages-it (<< 2.80-4)
Pre-Depends: libbz2-1.0, libc6 (>= 2.11), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4), tar (>= 1.23)
Suggests: apt
Breaks: apt (<< 0.7.7~), apt-cudf (<< 3.3~beta1-3~), aptitude (<< 0.4.7-1~), auctex (<< 11.87-3+deb8u1~), ccache (<< 3.1.10-1~), cups (<< 1.7.5-10~), debian-security-support (<< 2014.10.26~), distcc (<< 3.1-6.1~), doc-base (<< 0.10.5~), dpkg-dev (<< 1.15.8), fontconfig (<< 2.11.0-6.2~), fusionforge-plugin-mediawiki (<< 5.3.2+20141104-3~), gap-core (<< 4r7p5-2~), gitweb (<< 1:2.1.4-2.1~), grace (<< 1:5.1.24-3~), gxine (<< 0.5.908-3.1~), hoogle (<< 4.2.33-4~), icecc (<< 1.0.1-2~), install-info (<< 5.1.dfsg.1-3~), libapache2-mod-php5 (<< 5.6.4+dfsg-3~), libapache2-mod-php5filter (<< 5.6.4+dfsg-3~), libdpkg-perl (<< 1.15.8), libjs-protoaculous (<< 5~), man-db (<< 2.6.3-6~), mcollective (<< 2.6.0+dfsg-2.1~), php5-fpm (<< 5.6.4+dfsg-3~), pypy (<< 2.4.0+dfsg-3~), readahead-fedora (<< 2:1.5.6-5.2~), wordpress (<< 4.1+dfsg-1~), xfonts-traditional (<< 1.7~), xine-ui (<< 0.99.9-1.2~)
Conflicts: ada-reference-manual (<< 20021112web-4~), asn1-mode (<< 2.7-7~), bogosort (<< 0.4.2-3~), cl-yacc (<< 0.3-3~), cpp-4.1-doc (<< 4.1.2.nf2-4~), cpp-4.2-doc (<< 4.2.4.nf1-4~), gcc-4.1-doc (<< 4.1.2.nf2-4~), gcc-4.2-doc (<< 4.2.4.nf1-4~), gcj-4.1-doc (<< 4.1.2.nf2-4~), gcj-4.2-doc (<< 4.2.4.nf1-4~), gfortran-4.1-doc (<< 4.1.2.nf2-4~), gfortran-4.2-doc (<< 4.2.4.nf1-4~), ggz-docs (<< 0.0.14.1-2~), glame (<< 2.0.1-6~), gnat-4.1-doc (<< 4.1.2.nf2-4~), gnat-4.2-doc (<< 4.2.4.nf1-4~), gtalk (<< 0.99.10-16~), libalogg-dev (<< 1.3.7-2~), libgtk1.2-doc (<< 1.2.10-19~), libnettle-dev (<< 2~), liborbit-dev (<< 0.5.17-12~), libreadline5-dev (<< 5.2-8~), librep-doc (<< 0.90~), mmucl (<< 1.5.2-3~), nxml-mode (<< 20041004-9~), octave3.0-info (<< 1:3.0.5-7+rm), octave3.2-info (<< 3.2.4-12+rm), polgen-doc (<< 1.3-3+rm), r6rs-doc (<< 1.0-2~), serveez-doc (<< 0.1.5-3~), slat (<< 2.0-6~), texlive-base-bin-doc (<< 2007.dfsg.2-9~), ttcn-el (<< 0.6.9-2~), ulog-acctd (<< 0.4.3-3~), xconq-doc (<< 7.4.1-5~), zenirc (<< 2.112.dfsg-1~)
Conffiles:
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 985
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: armhf
Version: 1.0.1k-3+deb8u5
Depends: libc6 (>= 2.15), libssl1.0.0 (>= 1.0.1k-3+deb8u3)
Suggests: ca-certificates
Conffiles:
 /etc/ssl/openssl.cnf 7df26c55291b33344dc15e3935dabaf3
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains the general-purpose command line binary /usr/bin/openssl,
 useful for cryptographic operations such as:
  * creating RSA, DH, and DSA key parameters;
  * creating X.509 certificates, CSRs, and CRLs;
  * calculating message digests;
  * encrypting and decrypting with ciphers;
  * testing SSL/TLS clients and servers;
  * handling S/MIME signed or encrypted mail.

Package: wget
Status: install ok installed
Priority: important
Section: web
Installed-Size: 1683
Maintainer: Noël Köthe <noel@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.16-1
Depends: libc6 (>= 2.17), libgnutls-deb0-28 (>= 3.3.0), libidn11 (>= 1.13), libnettle4, libpsl0 (>= 0.4.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc 618c05b4106ad20141dcf6deada2e87f
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the web
 using HTTP(S) and FTP, the two most widely used internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as FTP
 sites -- you can use Wget to make mirrors of archives and
 home pages or to travel the web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both HTTP and FTP) that support it. Both HTTP and FTP
 retrievals can be time stamped, so Wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
Homepage: http://www.gnu.org/software/wget/

Package: libsqlite3-0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 753
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Multi-Arch: same
Source: sqlite3
Version: 3.8.7.1-1+deb8u1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: http://www.sqlite.org/

Package: sysv-rc
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 125
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59
Replaces: file-rc
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10), startpar
Recommends: lsb-base (>= 3.2-14)
Suggests: bum
Breaks: initscripts (<< 2.86.ds1-63)
Conflicts: file-rc
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, changing runlevels, and shutting down,
 configured through symbolic links in /etc/rc?.d/.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 3020
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Version: 1.0.9.8.3
Replaces: manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0)
Depends: libapt-pkg4.12 (>= 1.0.9.8.3), libc6 (>= 2.15), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.9), raspbian-archive-keyring, gnupg
Suggests: aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), apt-doc, python-apt
Breaks: manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0)
Conflicts: python-apt (<< 0.7.93.2~)
Conffiles:
 /etc/apt/apt.conf.d/01autoremove 5bf3e7bfa3bec23d634c9f3652da1787
 /etc/cron.daily/apt 4f33a76ad3e46913db2be02f0b587933
 /etc/kernel/postinst.d/apt-auto-removal 5d7236fb0c051eec2f5156b641fc447b
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys

Package: liblocale-gettext-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 32
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: liblocale-gettext-perl (1.05-8)
Version: 1.05-8+b1
Depends: libc6 (>= 2.4)
Pre-Depends: perl-base (>= 5.20.0-4), perlapi-5.20.0
Description: module using libc functions for internationalization in Perl
 The gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Homepage: https://metacpan.org/release/gettext

Package: libmpfr4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 704
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: armhf
Multi-Arch: same
Source: mpfr4
Version: 3.1.2-2
Depends: libc6 (>= 2.4), libgmp10
Pre-Depends: multiarch-support
Conflicts: libgmp3 (<< 4.1.4-3)
Description: multiple precision floating-point computation
 MPFR provides a library for multiple-precision floating-point computation
 with correct rounding.  The computation is both efficient and has a
 well-defined semantics. It copies the good ideas from the
 ANSI/IEEE-754 standard for double-precision floating-point arithmetic
 (53-bit mantissa).
Homepage: http://www.mpfr.org/

Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 113
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: lvm2 (2.02.111-2.2)
Version: 2:1.02.90-2.2
Depends: libc6 (>= 2.4), libdevmapper1.02.1 (>= 2:1.02.90), util-linux (>> 2.16)
Conflicts: devicekit-disks (<< 009)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: http://sources.redhat.com/lvm2/

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 882
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: armhf
Version: 1:3.3-1
Replaces: diff
Pre-Depends: libc6 (>= 2.17), libgcc1 (>= 1:4.4.0)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 678
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: same
Source: pam
Version: 1.1.8-3.1+deb8u1
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.1+deb8u1)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
 /etc/security/namespace.init b46b23d64860d1557d2a8f44b231fd54
 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://pam.sourceforge.net/

Package: insserv
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 174
Maintainer: Petter Reinholdtsen <pere@debian.org>
Architecture: armhf
Version: 1.14.0-5
Depends: libc6 (>= 2.13-28)
Suggests: bootchart2
Breaks: sysv-rc (<< 2.87dsf-3)
Conffiles:
 /etc/insserv.conf b15785c0c4b022a3ba0edb78ba71297c
 /etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd
Description: boot sequence organizer using LSB init.d script dependency information
 The insserv program is used by the standard SysV-based init system. It
 updates the order of symlinks in /etc/rc?.d/ based on dependencies
 specified by LSB headers in the init.d scripts themselves.
 .
 These declared relations between scripts make it possible to optimize
 the boot sequence for the currently installed set of packages, while
 detecting and rejecting dependency loops.
 .
 Using insserv incorrectly can result in an unbootable system.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1060
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-4.9
Version: 4.9.2-10
Replaces: libstdc++6-4.9-dbg (<< 4.9.0-3)
Provides: libstdc++6-armhf
Depends: gcc-4.9-base (= 4.9.2-10), libc6 (>= 2.18), libgcc1 (>= 1:4.4.0)
Pre-Depends: multiarch-support
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: gcc-4.9-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 178
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-4.9
Version: 4.9.2-10
Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: libkrb5-3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 779
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: armhf
Multi-Arch: same
Source: krb5
Version: 1.12.1+dfsg-19+deb8u2
Depends: libc6 (>= 2.16), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.9+dfsg~beta1), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.12.1+dfsg-19+deb8u2)
Pre-Depends: multiarch-support
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Conflicts: libkrb53
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: libffi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 38
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libffi
Version: 3.1-2
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.4.0)
Pre-Depends: multiarch-support
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.4-1
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: http://people.redhat.com/sgrubb/audit/

Package: libtext-charwidth-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 15
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Source: libtext-charwidth-perl (0.04-7)
Version: 0.04-7+b4
Depends: libc6 (>= 2.4), perl-base (>= 5.20.0-4), perlapi-5.20.0
Description: get display widths of characters on the terminal
 This module permits perl software to get the display widths of characters
 and strings on the terminal, using wcwidth() and wcswidth() from libc.
 .
 It provides mbwidth(), mbswidth(), and mblen().
Homepage: http://search.cpan.org/search?module=Text::CharWidth

Package: liblua5.2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Enrico Tassi <gareuselesinge@debian.org>
Architecture: armhf
Multi-Arch: same
Source: lua5.2
Version: 5.2.3-1.1
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Description: Shared library for the Lua interpreter version 5.2
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains runtime libraries.  You shouldn't need to install it
 explicitly.
Homepage: http://www.lua.org

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 64
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: same
Source: e2fsprogs
Version: 1.42.12-1.1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1189
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.4.2-9
Pre-Depends: libc6 (>= 2.17)
Suggests: mlocate | locate
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 186
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: same
Source: pam
Version: 1.1.8-3.1+deb8u1
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.8), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://pam.sourceforge.net/

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 318
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.25.2-6
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 1.32)
Pre-Depends: multiarch-support
Description: device mounting library
 The device mounting library, used by mount and umount helpers.

Package: libkeyutils1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 18
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: armhf
Multi-Arch: same
Source: keyutils
Version: 1.5.9-5
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: http://people.redhat.com/~dhowells/keyutils/

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2153
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: armhf
Source: shadow
Version: 1:4.2-3+deb8u1
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1)
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs c8e7f89a2c5665cf75a760d4341ce2d2
 /etc/pam.d/login 8cc9269fe679cb725d55925e95914499
 /etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a
 /etc/securetty d9e5bf5e6bfa00ddd273a3bcf1a49bec
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: http://pkg-shadow.alioth.debian.org/

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 698
Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>
Architecture: armhf
Version: 1.60-26
Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00)
Depends: libc6 (>= 2.4)
Conflicts: ja-trans (<= 0.8-2)
Description: NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".
Homepage: http://net-tools.berlios.de/

Package: fbset
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 184
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: armhf
Version: 2.1-28
Depends: libc6 (>= 2.4), udev | makedev (>= 2.3.1-24)
Conffiles:
 /etc/fb.modes 58b5d6e9daf8eee80f73cefb38f000d3
Description: framebuffer device maintenance program
 Program to modify settings for the framebuffer devices (/dev/fb[0-9]*
 or /dev/fb/[0-9]*) on Linux, like depth, virtual resolution, timing
 parameters etc.
Homepage: http://users.telenet.be/geertu/Linux/fbdev/

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1066
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.113+nmu3
Replaces: manpages-it (<< 0.3.4-2), manpages-pl (<= 20051117-1)
Depends: perl-base (>= 5.6.0), passwd (>= 1:4.0.12), debconf | debconf-2.0
Suggests: liblocale-gettext-perl, perl-modules
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/

Package: initscripts
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 159
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>= 2.4), debianutils (>= 4), lsb-base (>= 3.2-14), sysvinit-utils (>= 2.88dsf-50), sysv-rc | file-rc, coreutils (>= 5.93)
Recommends: psmisc, e2fsprogs
Breaks: aide (<< 0.15.1-5), atm-tools (<< 1:2.5.1-1.3), autofs (<< 5.0.0), bootchart (<< 0.10~svn407-4), console-common (<< 0.7.86), console-setup (<< 1.74), cruft (<< 0.9.16), eepc-acpi-scripts (<< 1.1.12), fcheck (<< 2.7.59-16), hostapd (<< 1:0.7.3-3), hurd (<< 0.5.git20131101~), ifupdown (<< 0.7.46), initramfs-tools (<< 0.104), libpam-mount (<< 2.13-1), live-build (<< 3.0~a26-1), ltsp-client-core (<< 5.2.16-1), mdadm (<< 3.2.2-1), nbd-client (<< 1:2.9.23-1), nfs-common (<< 1:1.2.5-3), portmap (<< 6.0.0-2), readahead-fedora (<< 2:1.5.6-3), resolvconf (<< 1.49), rpcbind (<< 0.2.0-7), rsyslog (<< 5.8.2-2), selinux-policy-default (<= 2:0.2.20100524-9), splashy (<< 0.3.13-5.1+b1), sysklogd (<< 1.5-6.2), util-linux (<< 2.20.1-5), wpasupplicant (<< 0.7.3-4), xymon (<< 4.3.0~beta2.dfsg-9)
Conflicts: libdevmapper1.02.1 (<< 2:1.02.24-1)
Conffiles:
 /etc/init.d/bootlogs 41ad826ad3091964c994b03177bbc29b
 /etc/init.d/bootmisc.sh 7e77260cb4071c21a99d581bfb8d2b74
 /etc/init.d/checkfs.sh 8cd37d9296845ce642e5671198469c32
 /etc/init.d/checkroot.sh 9c6f18f6f6b09ce96175bbbc5aaa8c99
 /etc/init.d/checkroot-bootclean.sh 955dcf4da7378f9f981d3f04c94d36d7
 /etc/init.d/halt a0e668699f774d928ddc62954155adb5
 /etc/init.d/hostname.sh 2180072dbb4e2f42f7ad4df4a2f9888d
 /etc/init.d/killprocs 9866a64a5d3d34552b0c36f5667cdacd
 /etc/init.d/motd dbc3f882af04254005bb96e4f780e5a0
 /etc/init.d/mountall.sh 7dc50e51261550184c078955c01b5628
 /etc/init.d/mountall-bootclean.sh 4c6b07a64798d8d78783e271238511f4
 /etc/init.d/mountnfs.sh a33d7b1a4d5043ea997af1f44c600cb9
 /etc/init.d/mountnfs-bootclean.sh 68aeda71fd9ae6861c3859c4ac33ee62
 /etc/init.d/mountdevsubfs.sh c18f4495f67dec33e257946215f54508
 /etc/init.d/mountkernfs.sh 12a99beb128e18bb6b277882233545af
 /etc/init.d/rc.local 7d505630f083ddc543cb68fbeb83a6b5
 /etc/init.d/reboot 39ce57bc053ad1bf9861347927d7db6b
 /etc/init.d/rmnologin eb11c47dd70b51a6e0d927f50490965e
 /etc/init.d/sendsigs 617e0ce4756cd2ac0c53634c4667fe22
 /etc/init.d/single bc7e38f0849ebfe767d162861fae002c
 /etc/init.d/umountfs 49f742a0f5af8124caba6c4264e78aa6
 /etc/init.d/umountnfs.sh 5137d5524cdba56d07e61c1cd5bb7238
 /etc/init.d/umountroot 57c8e9e95211ab355591dc8c211c8e8f
 /etc/init.d/urandom e6454386bfce38efb5987dd06cb3b21d
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
 /etc/default/rcS a4af750cc5d1edc264d47dc01d11e1b8
 /etc/default/tmpfs 9af2949a1c0373adfa0c7db2453eee62
 /etc/network/if-up.d/mountnfs 528b2efd88285d2f443fcf54234b5156
Description: scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 system at boot time and shut it down at halt or reboot time.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libcwidget3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1046
Maintainer: Manuel A. Fernandez Montecelo <mafm@debian.org>
Architecture: armhf
Multi-Arch: same
Source: cwidget
Version: 0.5.17-2
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.4.0), libncursesw5 (>= 5.6+20070908), libsigc++-2.0-0c2a (>= 2.2.0), libstdc++6 (>= 4.9), libtinfo5
Pre-Depends: multiarch-support
Suggests: libcwidget-dev
Description: high-level terminal interface library for C++ (runtime files)
 libcwidget is a modern user interface library modeled on GTK+ and Qt,
 but using curses as its display layer and with widgets that are
 tailored to a terminal environment.
 .
 This package contains the files that are required to run programs
 compiled against libcwidget.
Homepage: http://cwidget.alioth.debian.org

Package: gcc-4.7-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 203
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-4.7
Version: 4.7.3-11+rpi1
Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: ca-certificates
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 373
Maintainer: Michael Shuler <michael@pbandjelly.org>
Architecture: all
Multi-Arch: foreign
Version: 20141019+deb8u1
Depends: openssl (>= 1.0.0), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
 This package includes PEM files of CA certificates to allow SSL-based
 applications to check for the authenticity of SSL connections.
 .
 It includes, among others, certificate authorities used by the Debian
 infrastructure and those shipped with Mozilla's browsers.
 .
 Please note that Debian can neither confirm nor deny whether the
 certificate authorities whose certificates are included in this package
 have in any way been audited for trustworthiness or RFC 3647 compliance.
 Full responsibility to assess them belongs to the local system
 administrator.

Package: gcc-4.6-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 197
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-4.6
Version: 4.6.4-5+rpi1
Breaks: dehydra (<= 0.9.hg20110609-2), gcj-4.6-base (<< 4.6.1-4~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 40
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: acl
Version: 2.2.52-2
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 3667
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: openssh
Version: 1:6.7p1-5+deb8u2
Replaces: ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: libc6 (>= 2.17), libedit2 (>= 2.11-20080614), libgssapi-krb5-2 (>= 1.12.1+dfsg-2), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.1), zlib1g (>= 1:1.1.4), adduser (>= 3.10), dpkg (>= 1.7.0), passwd
Recommends: xauth
Suggests: ssh-askpass, libpam-ssh, keychain, monkeysphere
Conflicts: sftp
Conffiles:
 /etc/ssh/moduli 07d36dec51c06b538f196fcea2c8707c
 /etc/ssh/ssh_config 7c3fc0754c5a373bac7b09d9d4f6e403
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: http://www.openssh.org/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 470
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: ncurses
Version: 5.9+20140913-1
Pre-Depends: libc6 (>= 2.4), libtinfo5 (>= 5.9+20130119)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: http://invisible-island.net/ncurses/

Package: acl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 144
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.2.52-2
Depends: libacl1 (= 2.2.52-2), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.4)
Description: Access control list utilities
 This package contains the getfacl and setfacl utilities needed for
 manipulating access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: libslang2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1362
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: armhf
Multi-Arch: same
Source: slang2
Version: 2.3.0-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: libpng12-0
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Built-Using: unicode-data (= 7.0-2)
Homepage: http://www.jedsoft.org/slang/

Package: libapt-pkg4.12
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2511
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: apt
Version: 1.0.9.8.3
Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:4.4.0), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 4.9), zlib1g (>= 1:1.2.3.4)
Pre-Depends: multiarch-support
Breaks: apt (<< 0.9.4~), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).

Package: libusb-0.1-4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 37
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libusb
Version: 2:0.1.12-25
Replaces: libusb-dev (<< 2:0.1.12-25)
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
Homepage: http://www.linux-usb.org/

Package: locales
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 16265
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Source: glibc
Version: 2.19-18+deb8u4
Replaces: base-config, lliurex-belocs-locales-data, manpages-fr-extra (<< 20141022)
Depends: libc-bin (>> 2.19), debconf (>= 0.5) | debconf-2.0
Conflicts: base-config, belocs-locales-bin, belocs-locales-data
Conffiles:
 /etc/locale.alias b6fadfcab09ef56b506a2fc0dd81d11c
Description: GNU C Library: National Language (locale) data [support]
 Machine-readable data files, shared objects and programs used by the
 C library for localization (l10n) and internationalization (i18n) support.
 .
 This package contains the libc.mo i18n files, plus tools to generate
 locale definitions from source files (included in this package). It
 allows you to customize which definitions actually get
 generated. This is a space-saver over how this package used to be,
 with all locales generated by default. This created a package that
 unpacked to an excess of 30 megs.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libnih1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 183
Maintainer: Scott James Remnant <scott@netsplit.com>
Architecture: armhf
Source: libnih
Version: 1.0.3-4.3
Depends: libc6 (>> 2.19), libc6 (<< 2.20)
Description: NIH Utility Library
 libnih is a light-weight "standard library" of C functions to ease the
 development of other libraries and applications, especially those
 normally found in /lib.
 .
 This package contains the shared library.
Homepage: https://launchpad.net/libnih

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 274
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libsepol
Version: 2.3-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: http://userspace.selinuxproject.org/

Package: libidn11
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 305
Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Architecture: armhf
Multi-Arch: same
Source: libidn
Version: 1.29-1+deb8u1
Replaces: libidn11-dev
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libidn9-dev
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 318
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: dbus
Version: 1.8.20-0+deb8u1
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Recommends: dbus
Breaks: kde-window-manager (<< 4:4.4.5-9), kdebase-workspace-bin (<< 4:4.4.5-9)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 156
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-4.9 (4.9.2-10)
Version: 1:4.9.2-10
Provides: libgcc1-armhf
Depends: gcc-4.9-base (= 4.9.2-10), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/

Package: libreadline6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 307
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: same
Source: readline6
Version: 6.3-8
Depends: readline-common, libc6 (>= 2.15), libtinfo5
Pre-Depends: multiarch-support
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2442
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.25.2-6
Replaces: bash-completion (<< 1:2.1-3)
Depends: initscripts, lsb-base (>= 3.0-6), tzdata (>= 2006c-2)
Pre-Depends: libblkid1 (>= 2.25), libc6 (>= 2.15), libmount1 (>= 2.25), libncurses5 (>= 5.5-5~), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libslang2 (>= 2.2.4), libsmartcols1 (>= 2.25), libtinfo5, libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-3), grml-debootstrap (<< 0.68)
Conffiles:
 /etc/default/hwclock 3916544450533eca69131f894db0ca12
 /etc/init.d/hwclock.sh b5ca46c0c11ace2a1e40217c29646bf2
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.

Package: libustr-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 214
Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Architecture: armhf
Multi-Arch: same
Source: ustr
Version: 1.0.4-3
Depends: libc6 (>= 2.13-28), libgcc1 (>= 1:4.4.0)
Pre-Depends: multiarch-support
Description: Micro string library: shared library
 ustr (Micro string library) is a string API for C. It has tiny overhead over
 just plain strdup(), is much safer, is easier to use, is faster for many
 operations, can be used with read-only or automatically allocated data. You
 don't even need to link to the library to use it (so there are no
 dependencies).
 .
 This package contains the shared library for ustr.
Homepage: http://www.and.org/ustr/

Package: liblzo2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 128
Maintainer: Peter Eisentraut <petere@debian.org>
Architecture: armhf
Multi-Arch: same
Source: lzo2
Version: 2.08-1.2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: data compression library
 LZO is a portable, lossless data compression library.
 It offers pretty fast compression and very fast decompression.
 Decompression requires no memory.  In addition there are slower
 compression levels achieving a quite competitive compression ratio
 while still decompressing at this very high speed.
Homepage: http://www.oberhumer.com/opensource/lzo/

Package: libnih-dbus1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 117
Maintainer: Scott James Remnant <scott@netsplit.com>
Architecture: armhf
Source: libnih
Version: 1.0.3-4.3
Depends: libnih1 (= 1.0.3-4.3), libc6 (>= 2.4), libdbus-1-3 (>= 1.2.16)
Description: NIH D-Bus Bindings Library
 libnih-dbus is a D-Bus bindings library that integrates with the main
 loop provided by libnih.
 .
 This package contains the shared library.
Homepage: https://launchpad.net/libnih

Package: libwrap0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 72
Maintainer: Marco d'Itri <md@linux.it>
Architecture: armhf
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-25
Replaces: tcpd (<< 7.6.q-20)
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Recommends: tcpd
Breaks: tcpd (<< 7.6.q-20)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: libicu52
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 26531
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Multi-Arch: same
Source: icu
Version: 52.1-8+deb8u3
Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.9)
Pre-Depends: multiarch-support
Description: International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the runtime
 libraries for ICU.
Homepage: http://www.icu-project.org

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 553
Maintainer: Clint Adams <clint@debian.org>
Architecture: armhf
Version: 4.2.2-4
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.7), libselinux1 (>= 1.32)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: http://www.gnu.org/software/sed/

Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 187
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.25.2-6
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: smart column output alignment library
 The smart column output alignment library, used by fdisk utilities.

Package: libcryptsetup4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 177
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cryptsetup
Version: 2:1.6.6-5
Depends: libc6 (>= 2.17), libdevmapper1.02.1 (>= 2:1.02.90), libgcrypt20 (>= 1.6.1), libuuid1 (>= 2.16), libgpg-error0 (>= 1.10-0.1)
Description: disk encryption support - shared library
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the libcryptsetup shared library.
Homepage: http://code.google.com/p/cryptsetup/

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 66
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Multi-Arch: foreign
Version: 5.3
Depends: lsb-base (>= 3.0-6)
Recommends: ifupdown
Breaks: ifupdown (<< 0.7)
Conffiles:
 /etc/rpc f0b6f6352bf886623adc04183120f83b
 /etc/protocols bb9c019d6524e913fd72441d58b68216
 /etc/services 7d9960c77b363e2c2f41b77733cf57d4
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

Package: libelfg0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 105
Maintainer: Alex Pennace <alex@pennace.org>
Architecture: armhf
Multi-Arch: same
Source: libelf
Version: 0.8.13-5
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libelf, libelf0 (<= 0.6.4-5)
Description: an ELF object file access library
 libelf provides routines to access and manipulate ELF object
 files. It is still not complete, but is required for a number of programs,
 such as Eli (a state of the art compiler generation system), and Elk (the
 Extension Language Kit - an implementation of the Scheme programming
 language.)
 .
 This shared library may be needed by pre-packaged programs. To compile
 programs with this library, you will need to install the libelfg0-dev
 package as well.

